European spudgun community
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  UsergroupsUsergroups  RegisterRegister  Log inLog in  

Share | 
 

 Deathray MP

View previous topic View next topic Go down 
AuthorMessage
BTB
Admin
avatar

Aantal berichten : 18
Registratiedatum : 2009-10-07

PostSubject: Deathray MP   Wed Oct 07, 2009 10:17 pm

Ach..het ding ligt al weer uit elkaar...maar goed
Een BB machine gun..schoot 6 mm airsoft kogeltjes.Door ze simpelweg beven een luchtinlaat te plaatsen worden ze omhoog geblazen en worden vervolgens 1 voor 1 door de loop " weg gezogen".In werkelijkheid geblazen natuurlijk.
Schoot best leuk door redbull blikjes enzo...
Ongeveer 50 schoten per seconde...bbbbbbbbbbbbrrrrrrrrrrrrrrrrrrrrrrrppppppppp
Het blaaspistool wat ik ervoor gebruikte kwam van een hogedruk reiniger...anders zou die de druk van de paintball fles nooit aankunnen natuurlijk.



het binnen werk: een zuigertje duwt de bb's zachtjes aan tot boven de inlaat.De ingang van de loop was afgeschermd met een knietje zodat de boel niet verstopte..
Back to top Go down
View user profile http://eurospudguns.fullforums.org
Neo-Bricole

avatar

Aantal berichten : 9
Registratiedatum : 2009-10-09

PostSubject: Re: Deathray MP   Fri Oct 09, 2009 7:21 pm

I don't very understand your post,but the gun is really good like Smile

It's same of Paintball guns for the mechanism?
Back to top Go down
View user profile
BTB
Admin
avatar

Aantal berichten : 18
Registratiedatum : 2009-10-07

PostSubject: Re: Deathray MP   Fri Oct 09, 2009 8:01 pm

No it;s a bb machinegun.You basically blow the air up in from the bottom, bb's fly up and are fired out the barrel.
One at a time.The moment the first bb plugs the barrel, the pressure is no flowing out, so a new bb will only be blown ito the barrel as the first one exits.
So it;s not like buckshot but it fires them one after another at very high rate of fire.

approximately 50 a second
Back to top Go down
View user profile http://eurospudguns.fullforums.org
guiguitare

avatar

Aantal berichten : 4
Registratiedatum : 2009-10-09
Leeftijd : 26

PostSubject: Re: Deathray MP   Fri Oct 09, 2009 8:09 pm

Ok, so it's a straffer!

Very nice.
But the hpa bottle is fill with CO2? Or you just use it with compressed air?
Back to top Go down
View user profile
Neo-Bricole

avatar

Aantal berichten : 9
Registratiedatum : 2009-10-09

PostSubject: Re: Deathray MP   Fri Oct 09, 2009 8:37 pm

Oh,yes,a strafer Smile

I experienced that kind of gun , with often good results, I stoped because of the marbles' price.

PS:

@guiguitare: bien d'avoir une copine qui parle couramment anglais x)
Back to top Go down
View user profile
BTB
Admin
avatar

Aantal berichten : 18
Registratiedatum : 2009-10-07

PostSubject: Re: Deathray MP   Fri Oct 09, 2009 9:29 pm

This one is no longer in one piece..But I used the bottle with 45 bar of air in it, just because I never took the time to refill it with CO2.

I re-used the parts for a smaller version.


wich did the same thing but with 12 gram CO2 bulbs:


Inside is a pressure washer valve rated to 215 bar, and a 12 gram adapter from a paintball shop.This gun I sold, so I no longer own it.
Back to top Go down
View user profile http://eurospudguns.fullforums.org
Neo-Bricole

avatar

Aantal berichten : 9
Registratiedatum : 2009-10-09

PostSubject: Re: Deathray MP   Fri Oct 09, 2009 10:07 pm

What are you used for make the handle?
Back to top Go down
View user profile
BTB
Admin
avatar

Aantal berichten : 18
Registratiedatum : 2009-10-07

PostSubject: Re: Deathray MP   Fri Oct 09, 2009 10:10 pm


I used epoxy filler. And a lot of sandpaper!!

without it it looked like the above picture. ( I did cut off some pieces and shortened some but this was the only picture of the insides)
I turned the back 90 degrees to get it more compact.It uses a real airgun barrel in 4.5 mm.
( rifled)
Back to top Go down
View user profile http://eurospudguns.fullforums.org
Neo-Bricole

avatar

Aantal berichten : 9
Registratiedatum : 2009-10-09

PostSubject: Re: Deathray MP   Fri Oct 09, 2009 11:44 pm

Epoxy?That a good choice,very resistant but expensive... :/
Back to top Go down
View user profile
MRR



Aantal berichten : 8
Registratiedatum : 2009-10-07

PostSubject: Re: Deathray MP   Sat Oct 10, 2009 12:14 pm

Epoxy is not really expensive when you look at the right places.

In DIY stores you only get these small tubes for 5€ and more . I get it from a building supplier -> 1 liter + hardener for 30€, now thats a lot of epoxy....!
Back to top Go down
View user profile
Neo-Bricole

avatar

Aantal berichten : 9
Registratiedatum : 2009-10-09

PostSubject: Re: Deathray MP   Sat Oct 10, 2009 4:23 pm

You are lucky!

I want that ^^
Back to top Go down
View user profile
Necrosis
Über admin


Aantal berichten : 1
Registratiedatum : 2009-10-07

PostSubject: Re: Deathray MP   Mon Oct 12, 2009 2:37 am

Yo, hoe heb je dat met dat 12 gram patroontje gedaan? Ik kan alleen maar dingen bedenken waar het patroontje niet genoeg open gaat na het aandraaien. ):
Back to top Go down
View user profile
BTB
Admin
avatar

Aantal berichten : 18
Registratiedatum : 2009-10-07

PostSubject: Re: Deathray MP   Mon Oct 12, 2009 10:22 pm

Je kunt gewoon een adaptertje kopen in een paintballshop.
(You can buy 12 gram adapters at a paintballshop)
Back to top Go down
View user profile http://eurospudguns.fullforums.org
jrrdw
Admin


Aantal berichten : 8
Registratiedatum : 2009-10-09

PostSubject: Re: Deathray MP   Wed Nov 04, 2009 2:00 am

This thread and post moved to the new forums, see home page for more information, jrrdw.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: Deathray MP   

Back to top Go down
 
Deathray MP
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
eurospudguns :: Cannon showcase :: BBMG-
Jump to: